Accessories
Class 1 Certified
-
Weather Protection
Protect your measurement microphone from rain, wind, dust and perching birds with a professional outdoor weather protection kit. The corrosion-free polymer housing, windscreen, water-repellent membrane and bird spike provide excellent protection from rain, wind, dust and perching birds. A weather protection is dedicated for precise acquisition of environmental noise data in outdoor applications.
-
Class 1 Sound Calibrator
The battery-operated Class 1 Sound Calibrator is classified for the calibration of class 1 measurement microphones, sound level meters and other acoustic measurement equipment. This precision microphone calibrator delivers 94 dB at a frequency of 1 kHz.
-
Manufacturer Calibration Certificate
The calibration certificate lists the individual product data with serial number. The calibration and adjustment procedures follow the documentation and traceability requirements of the EN ISO / IEC 17025 standard.
-
Microphone PreAmplifier
The MA220 and MA230 offer a low noise microphone preamplifier compatible with standardized 1/2" microphone capsules. Both include an electronic datasheet for fast setup and ensuring accurate measurements. The MA230 is additionaly enabled for periodic self-tests (Charge Injection Check CIC) dedicated for permanent noise monitoring stations.
Class 1 Frequency Respons
-
Weather Protection
Protect your measurement microphone from rain, wind, dust and perching birds with a professional outdoor weather protection kit. The corrosion-free polymer housing, windscreen, water-repellent membrane and bird spike provide excellent protection from rain, wind, dust and perching birds. A weather protection is dedicated for precise acquisition of environmental noise data in outdoor applications.
-
Class 1 Sound Calibrator
The battery-operated Class 1 Sound Calibrator is classified for the calibration of class 1 measurement microphones, sound level meters and other acoustic measurement equipment. This precision microphone calibrator delivers 94 dB at a frequency of 1 kHz.
-
Manufacturer Calibration Certificate
The calibration certificate lists the individual product data with serial number. The calibration and adjustment procedures follow the documentation and traceability requirements of the EN ISO / IEC 17025 standard.
-
Microphone PreAmplifier
The MA220 and MA230 offer a low noise microphone preamplifier compatible with standardized 1/2" microphone capsules. Both include an electronic datasheet for fast setup and ensuring accurate measurements. The MA230 is additionaly enabled for periodic self-tests (Charge Injection Check CIC) dedicated for permanent noise monitoring stations.
Class 2
-
Weather Protection
Protect your measurement microphone from rain, wind, dust and perching birds with a professional outdoor weather protection kit. The corrosion-free polymer housing, windscreen, water-repellent membrane and bird spike provide excellent protection from rain, wind, dust and perching birds. A weather protection is dedicated for precise acquisition of environmental noise data in outdoor applications.
-
Manufacturer Calibration Certificate
The calibration certificate lists the individual product data with serial number. The calibration and adjustment procedures follow the documentation and traceability requirements of the EN ISO / IEC 17025 standard.
-
Class 2 Sound Calibrator
The battery-operated Class 2 Sound Calibrator is classified for the calibration of class 2 measurement microphones, sound level meters and other acoustic measurement equipment. This microphone calibrator delivers 114 dB at a frequency of 1 kHz.
FX100 Audio Analyzer
-
Speaker Impedance Power FX-SIP
The integrated power amplifier and current sensor offer complete testing of one or two connected loudspeakers or resistive loads (2*10 W or 1*30 W).
-
Digital Audio FX-AES
The Digital Audio FX-AES module extends the FX100 Audio Analyzer with a digital audio generator and analyzer. The sync-input allows the generator clock to be synchronized to an external clock reference.
-
Measurement Microphone M2010 / M2015
The M2010 and M2015 are compact, high-performance measurement microphones with a class1 frequency response, dedicated to research, design lab, end-of-line testing and service. They are particularly suited for applications with restricted available space.
-
Class 1 Sound Calibrator
The battery-operated Class 1 Sound Calibrator is classified for the calibration of class 1 measurement microphones, sound level meters and other acoustic measurement equipment. This precision microphone calibrator delivers 94 or 114 dB at a frequency of 1 kHz.
-
Environment Sensor
Measures temperature, humidity and barometric pressure of the test environment. The test data are automatically integrated into turnkey test solutions for close monitoring of the manufacturing process stability.
-
Input Switcher IS-1002
IS-1002 is an advanced, multi-functional audio input switcher with 10 input channels and 2 output channels, featuring individual power supplies for microphones on each input channel. Up to 8 input switchers can be cascaded for multi-channel applications totaling 80 input channels.
-
Bluetooth Box
The Bluetooth Audio Interface U 980 allows you to connect an FX100 Audio Analyzer to a Bluetooth device – e.g. wireless headset, loudspeaker – to measure its audio quality (supported profiles: A2DP and HFP). The Box thereby acts as signal relay between the Bluetooth device and the FX100.
-
Speaker Impedance FX-SIH
Measure speaker impedance and current under load
-
Filter for Class-D Amplifier Testing FX-DF
The FX-DF module comprises two analog filters that are linked to the output signals of the amplifier under test. A load (substituting the impedance provided by the speakers in normal operation) is connected to the test system through banana plugs. The filtered signals are automatically routed internally to the two analysis channels.
-
Channel Extension 2 CH -> 4 CH
Extends the FX100 base unit from 2 channels to 4 individual input/output channels.
-
Input Switcher FX-IS
Offers 4 additional switched input channels. Multiple FX-IS modules can be installed, thus up to 14 switched inputs may be established.
-
Output Switcher FX-OS
Offers 4 additional switched output channels. Multiple FX-OS modules can be installed, thus up to 14 switched outputs may be established.
-
Accelerometers
A range of uniaxial piezoelectric accelerometers is offered for analyzing the vibrations of devices under test. These may range from slight excursions up to strong impacts. The accelerometers can be mounted either with a screw or a magnet depending on the type selected.
-
MEMS Mic Interface Box
The MEMS Mic Interface Box converts the digital output signals of up to eight MEMS microphones into individual analog audio channels. The microphone output signals, which must be encoded in ½ cycle PDM format, are simultaneously D/A converted and then measured by the FX100 Analyzer. The operator may select the clock frequency or activate the calibration…
-
Flexus Digital I/O Adapter Box
The Flexus Digital I/O Adapter Box allows to connect the FX100 Audio Analyzer to peripheral devices such as a PLC, foot switch or stack light.
-
Turntable TT01
The Turntable TT01 allows you to execute directivity measurements (polar plots) of microphones, as well as lightweight loudspeakers or other devices. The USB controlled TT01 is supported by NTi Audio software packages, and can also be programmed to your individual needs, e.g. using a .NET API or MATLAB library.
-
100 V RT-IB Impedance Box
The 100V Impedance Box is tailored for the impedance response and resonance frequency testing of 70/100V speakers.
-
Stack Light
The FX100 Audio Analyzer controls the external Stack Light via the built-in auxiliary I/O interface and the Flexus I/O Adapter Box. The stack light has three lamp sections, colored green, orange and red.
-
Foot Switch
The Flexus Foot Switch triggers the test execution via the Flexus I/O Adapter box.
-
FX100 Rack Mounting
Mount one single instrument or two FX100 Audio Analyzers besides each other into a rack.
MR-PRO
-
70V/100V Protection for MR-PRO
Protection against high voltages.
-
Cable Test Plug for MR-PRO
The Cable Test Plug is used for single-ended cable testing.
-
Exel System Case
Compact system case for safe transport of measurement devices.
-
Minirator -40dB Adapter
Adapter for generating high quality microphone level signals.
-
Ever-ready Pouch for MR-PRO/MR2
The Ever-ready Pouch protects the instrument during transport and operation.
-
Mains Power Adapter
Mains Power Adapter with removable plug types.
-
Manufacturer Calibration Certificate
The calibration certificate lists the individual product data with serial number. The calibration and adjustment procedures follow the documentation and traceability requirements of the EN ISO / IEC 17025 standard.
Outdoor Measurement Microphones
-
Weather Protection
Protect your measurement microphone from rain, wind, dust and perching birds with a professional outdoor weather protection kit. The corrosion-free polymer housing, windscreen, water-repellent membrane and bird spike provide excellent protection from rain, wind, dust and perching birds. A weather protection is dedicated for precise acquisition of environmental noise data in outdoor applications.
-
Class 1 Sound Calibrator
The battery-operated Class 1 Sound Calibrator is classified for the calibration of class 1 measurement microphones, sound level meters and other acoustic measurement equipment. This precision microphone calibrator delivers 94 dB at a frequency of 1 kHz.
-
Manufacturer Calibration Certificate
The calibration certificate lists the individual product data with serial number. The calibration and adjustment procedures follow the documentation and traceability requirements of the EN ISO / IEC 17025 standard.
-
Class 2 Sound Calibrator
The battery-operated Class 2 Sound Calibrator is classified for the calibration of class 2 measurement microphones, sound level meters and other acoustic measurement equipment. This microphone calibrator delivers 114 dB at a frequency of 1 kHz.
-
Dehumidifier
The Dehumidifier protects the microphone capsule from possible water damage caused by condensation due to high humidity. This provides reliable and precise measurements in changing environmental conditions. The Dehumidifier is an accessory for the outdoor measurement microphone M2230-WP (= M2230 with WP30) and M2340-WP (= M2340 with WP30).
-
Microphone PreAmplifier
The MA220 and MA230 offer a low noise microphone preamplifier compatible with standardized 1/2" microphone capsules. Both include an electronic datasheet for fast setup and ensuring accurate measurements. The MA230 is additionaly enabled for periodic self-tests (Charge Injection Check CIC) dedicated for permanent noise monitoring stations.
QC Microphones
-
Class 1 Sound Calibrator
The battery-operated Class 1 Sound Calibrator is classified for the calibration of class 1 measurement microphones, sound level meters and other acoustic measurement equipment. This precision microphone calibrator delivers 94 dB at a frequency of 1 kHz.
-
Manufacturer Calibration Certificate
The calibration certificate lists the individual product data with serial number. The calibration and adjustment procedures follow the documentation and traceability requirements of the EN ISO / IEC 17025 standard.
XL2 Audio & Acoustic Analyzer
-
Measurement Microphones
A range of measurement microphones are available to suit your requirements. The measurement microphones combine with the XL3 or XL2 for a comprehensive sound level meter and acoustic analyzer.
-
ASD Cable
The ASD Cable allows for extended connections of the NTi Audio measurement microphones. It supports the transfer of the electronic data sheet from the microphone to the XL2 Analyzer.
-
System Case
Compact field case for instruments and accessories
-
Weather Protection
Protect your measurement microphone from rain, wind, dust and perching birds with a professional outdoor weather protection kit. The corrosion-free polymer housing, windscreen, water-repellent membrane and bird spike provide excellent protection from rain, wind, dust and perching birds. A weather protection is dedicated for precise acquisition of environmental noise data in outdoor applications.
-
Class 1 Sound Calibrator
The battery-operated Class 1 Sound Calibrator is classified for the calibration of class 1 measurement microphones, sound level meters and other acoustic measurement equipment. This precision microphone calibrator delivers 94 dB at a frequency of 1 kHz.
-
Class 2 Sound Calibrator
The battery-operated Class 2 Sound Calibrator is classified for the calibration of class 2 measurement microphones, sound level meters and other acoustic measurement equipment. This microphone calibrator delivers 114 dB at a frequency of 1 kHz.
-
Limit Light
The XL2 Sound Level Meter in combination with this Limit Light offers a turnkey solution for live sound monitoring. The Limit Light provides a pre-warning with an orange light and indicates that levels have been exceeded with a red light. The sound level limits are set in the XL2.
-
Stack Light
The XL2 Audio and Acoustic Analyzer in combination with this Stack Light provides a turnkey solution for noise level monitoring or pass / fail measurements where a prominent visual indication is required.
-
NetBox
The NetBox connects the XL2 Sound Level Meter to the internet for unattended noise monitoring. It transfers the measurement data to the fully-managed NoiseScout Web Portal (Managed Mode) in real time or provides a secure internet FTP access to the instrument (Gateway Mode). The noise monitor may be connected via 4G, 5G, LAN or Wi-Fi…
-
Lightweight Tripod
Retractable, lightweight tripod with 1/4" ball head and 3/8" mounting thread. The flexible ball head mounts the XL3 or XL2 Analyzer at any angle. The tripod is suitable for all measurement microphones, the outdoor microphone and the TalkBox.
-
Mounting Adapter
This mechanical adapter piece mounts the XL3 or XL2 on a microphone stand. Adapters for 3/8" or 5/8" stands are included.
-
Ball Head Mount
This flexible universal joint mounts the XL3 and XL2 on a 1/4" or 3/8" stand. It provides the facility to mount the XL3 and XL2 at any angle.
-
Input Keypad
The Input Keypad offers four marker keys to trigger an event recording or categorize any noise during measurements. A typical application is the subjective categorizing of any annoying industrial noise by persons living in the neighborhood.
-
ASD Flat Ribbon Cable 1m
Microphone cable for passing closed windows or doors. It supports the transfer of the electronic data sheet from the microphone to the XL3 & XL2 Analyzer.
-
Digital I/O Adapter PCB
The XL3 or XL2 Analyzer together with the Digital I/O Adapter controls external peripherals, such as a big red-orange-green lamp displaying exceeding sound levels. The Digital I/O Adapter connects to the digital I/O interface of the XL2 Analyzer.
-
Weather Station Models
Enhance your acoustic measurements with real-time weather data: wind, rain intensity & more. Connect a compatible weather station to your XL3 or XL2 Acoustic Analyzer for precise outdoor noise monitoring.
-
Basic Outdoor Case
The Basic Outdoor Case is a simple and efficient solution for outdoor noise monitoring. Powered either by an external mains supply or a small, high capacity battery pack the case is more than adequate for a number of days of monitoring. The robust and lightweight design protects the Sound Level Meter and accessories from a wide…
-
Heavy Duty Outdoor Case
The heavy duty outdoor case is a professional solution for short- and medium term unattended noise monitoring. The case provides comprehensive protection against dust, water and impacts. Internal dimensions provide ample space for battery packs to power the Sound Level Meter.
-
Tracer Battery Adapter Cable
The Tracer Battery Adapter Cable connects the Tracer battery pack to a NetBox or an XL3/XL2 Analyzer. It ensures that the connected instruments start up properly if the battery has been completely discharged.
-
GPS Receiver (customized)
The specially adapted GNSS receiver comes with a built-in active antenna in a white housing. It connects to the XL2 Sound Level Meter and the NetBox. Typical applications are to synchronize the start time of one or multiple XL2s precisely with the GPS signal (+/- 0.7 ms) or presenting the precise instrument position in NoiseScout…
-
Weatherproof Enclosure for Noise Monitoring Terminal
The weatherproof enclosure is the tailored fixed installation solution for unattended noise monitoring. The enclosure is IP66 (without ventilation) or IP55 (with built-in fan) rated, highly secure and constructed of strong, hard-wearing reinforced fiberglass.
-
XLR Adapter ASD
XLR male/female Adapter with electronic data sheet for automated sensor detection (ASD) of other sensors. The adapter is available in two variations: The type ASD-2 is used for measurement microphones with isolated housing ground connection and the type ASD for induction loop and other sensors.
-
Dehumidifier
The Dehumidifier protects the microphone capsule from possible water damage caused by condensation due to high humidity. This provides reliable and precise measurements in changing environmental conditions. The Dehumidifier is an accessory for the outdoor measurement microphone M2230-WP (= M2230 with WP30) and M2340-WP (= M2340 with WP30).
-
ICP Adapter ASD
The ICP Adapter connects to the XL2 and generates ICP power supply for accelerometers and other custom sensors. The adapter offers an electronic data sheet, which stores the sensitivity and individual serial number of the connected sensor.
-
Backpack
The backpack provides the professional transport protection for work in the field. It offers space for the handheld instruments and accessories.
-
Ever-ready Pouch for XL2
The Ever-ready Pouch protects the XL2 during transport and operation. With its convenient belt-clip, the XL2 can be kept close by for those tasks requiring both hands. The Ever-ready Pouch allows operation of the XL2 fitted in the pouch.
-
Accelerometers
A range of uniaxial piezoelectric accelerometers is offered for analyzing the vibrations of devices under test. These may range from slight excursions up to strong impacts. The accelerometers can be mounted either with a screw or a magnet depending on the type selected.
-
Windscreen
Enhance the audio recording experience with our windscreen solution. Our windscreen was designed to minimize noise caused by turbulence in windy environments and protects the microphone and preamplifier from dust, bumps, and shocks.
-
SD Card 32GB
The XL2 requires an SD card that can continuously and simultaneously store many data streams. Unfortunately, many cards available on the market are known to interrupt the read/write process for periods of more than 10 seconds.
-
Mains Power Adapter
Mains Power Adapter with removable plug types. It suits the typical power sockets in Australia, China, Europe, Japan, US and UK; 100-240 VAC.
-
Battery Charger
The Battery Charger efficiently recharges the spare battery whilst you are using your XL2 Audio and Acoustic Analyzer. One spare Li-Po battery is included with the battery charger.
-
Microphone PreAmplifier
The MA220 and MA230 offer a low noise microphone preamplifier compatible with standardized 1/2" microphone capsules. Both include an electronic datasheet for fast setup and ensuring accurate measurements. The MA230 is additionaly enabled for periodic self-tests (Charge Injection Check CIC) dedicated for permanent noise monitoring stations.
-
Manufacturer Calibration Certificate
The calibration certificate lists the individual product data with serial number. The calibration and adjustment procedures follow the documentation and traceability requirements of the EN ISO / IEC 17025 standard.
XL2 Vibration Meter
-
ASD Cable
The ASD Cable allows for extended connections of the NTi Audio measurement microphones. It supports the transfer of the electronic data sheet from the microphone to the vibration meter.
-
Exel System Case
Compact system case for safe transport of measurement devices.
-
Stack Light
The Vibration Meter in combination with this Stack Light provides a turnkey solution for noise level monitoring or pass / fail measurements where a prominent visual indication is required.
-
Digital I/O Adapter PCB
The Vibration Meter together with the Digital I/O Adapter controls external peripherals, such as a large red-orange-green lamp displaying exceeded sound levels
-
ICP Adapter ASD (required)
The ICP Adapter connects to the Vibration Meter and generates an ICP power supply for accelerometers and other custom sensors.
-
Accelerometers
A range of uniaxial piezoelectric accelerometers is offered for analyzing the vibrations of devices under test. These may range from slight excursions up to strong impacts. The accelerometers can be mounted either with a screw or a magnet depending on the type selected.
-
SD Card 32GB
The Vibration Meter requires an SD card that can continuously and simultaneously store many data streams.
-
Battery Charger
The Battery Charger efficiently recharges a spare battery whilst using the Vibration Meter elsewhere. One spare Li-Po battery is included with the battery charger.
-
Mains Power Adapter
Mains Power Adapter with removable plug types. It suits the typical power sockets in Australia, China, Europe, Japan, US and UK; 100-240 VAC.
XL3 Acoustic Analyzer
-
Measurement Microphones
A range of measurement microphones are available to suit your requirements. The measurement microphones combine with the XL3 or XL2 for a comprehensive sound level meter and acoustic analyzer.
-
Weather Protection
Protect your measurement microphone from rain, wind, dust and perching birds with a professional outdoor weather protection kit. The corrosion-free polymer housing, windscreen, water-repellent membrane and bird spike provide excellent protection from rain, wind, dust and perching birds. A weather protection is dedicated for precise acquisition of environmental noise data in outdoor applications.
-
Heavy-Duty Outdoor Case
The heavy-duty outdoor case is a professional solution for short- and medium-term unattended noise monitoring. The case provides comprehensive protection against dust, water and impacts. Internal dimensions provide ample space for battery packs to power the Sound Level Meter.
-
Class 1 Sound Calibrator
The battery-operated Class 1 Sound Calibrator is classified for the calibration of class 1 measurement microphones, sound level meters and other acoustic measurement equipment. This precision microphone calibrator delivers 94 dB at a frequency of 1 kHz.
-
Class 2 Sound Calibrator
The battery-operated Class 2 Sound Calibrator is classified for the calibration of class 2 measurement microphones, sound level meters and other acoustic measurement equipment. This microphone calibrator delivers 114 dB at a frequency of 1 kHz.
-
Sorama CAM iV64
Accurate sound visualization
-
Screen Protection
The Screen Protection protects the XL3 Screen during use and operation.
-
GPS Mouse
The GPS Mouse for the XL3 enhances the reports of the device with accurate location and timing data. It features impressive sensitivity and compatibility with multiple satellite systems. Upon successful position fix, the top LED initiates a flashing indicator. Easy mounting is facilitated by a bottom magnet, with optimal performance achieved when the LED side…
-
ASD Cable
ASD cable for XL3 Analyzer. Extends microphone connections and enables electronic data sheet transfer up to 20 m for accurate measurements.
-
USB-C to LAN Adapter
This USB-C to LAN Adapter allows you to easily access your network with full high-speed internet.
-
Lightweight Tripod
Retractable, lightweight tripod with 1/4" ball head and 3/8" mounting thread. The flexible ball head mounts the XL3 or XL2 Analyzer at any angle. The tripod is suitable for all measurement microphones, the outdoor microphone and the TalkBox.
-
G160 4G/LTE Gateway
The G160 4G/LTE Gateway is a small, lightweight, and energy-efficient industrial gateway equipped with mission-critical LTE capabilities, Gigabit Ethernet interface, and USB-C port.
-
Mounting Adapter
This mechanical adapter piece mounts the XL3 or XL2 on a microphone stand. Adapters for 3/8" or 5/8" stands are included.
-
Ball Head Mount
This flexible universal joint mounts the XL3 and XL2 on a 1/4" or 3/8" stand. It provides the facility to mount the XL3 and XL2 at any angle.
-
Input Keypad
The Input Keypad offers four marker keys to trigger an event recording or categorize any noise during measurements. A typical application is the subjective categorizing of any annoying industrial noise by persons living in the neighborhood.
-
ASD Flat Ribbon Cable 1m
Microphone cable for passing closed windows or doors. It supports the transfer of the electronic data sheet from the microphone to the XL3 & XL2 Analyzer.
-
Digital I/O Adapter PCB
The XL3 or XL2 Analyzer together with the Digital I/O Adapter controls external peripherals, such as a big red-orange-green lamp displaying exceeding sound levels. The Digital I/O Adapter connects to the digital I/O interface of the XL2 Analyzer.
-
Weather Station Models
Enhance your acoustic measurements with real-time weather data: wind, rain intensity & more. Connect a compatible weather station to your XL3 or XL2 Acoustic Analyzer for precise outdoor noise monitoring.
-
Tracer Battery Adapter Cable
The Tracer Battery Adapter Cable connects the Tracer battery pack to a NetBox or an XL3/XL2 Analyzer. It ensures that the connected instruments start up properly if the battery has been completely discharged.
-
Weatherproof Enclosure for Noise Monitoring Terminal
The weatherproof enclosure is the tailored fixed installation solution for unattended noise monitoring. The enclosure is IP66 (without ventilation) or IP55 (with built-in fan) rated, highly secure and constructed of strong, hard-wearing reinforced fiberglass.
-
XLR Adapter ASD
XLR male/female Adapter with electronic data sheet for automated sensor detection (ASD) of other sensors. The adapter is available in two variations: The type ASD-2 is used for measurement microphones with isolated housing ground connection and the type ASD for induction loop and other sensors.
-
Dehumidifier
The Dehumidifier protects the microphone capsule from possible water damage caused by condensation due to high humidity. This provides reliable and precise measurements in changing environmental conditions. The Dehumidifier is an accessory for the outdoor measurement microphone M2230-WP (= M2230 with WP30) and M2340-WP (= M2340 with WP30).
-
System Case
Compact field case for instruments and accessories
-
Backpack
The backpack provides the professional transport protection for work in the field. It offers space for the handheld instruments and accessories.
-
Ever-ready Pouch for XL3
Transport protection with belt loop for the acoustic analyzer. The measuring device can remain in the belt pouch even during measurements, ensuring that the XL3 is always protected.
-
Windscreen
Enhance the audio recording experience with our windscreen solution. Our windscreen was designed to minimize noise caused by turbulence in windy environments and protects the microphone and preamplifier from dust, bumps, and shocks.
-
Microphone PreAmplifier
The MA220 and MA230 offer a low noise microphone preamplifier compatible with standardized 1/2" microphone capsules. Both include an electronic datasheet for fast setup and ensuring accurate measurements. The MA230 is additionaly enabled for periodic self-tests (Charge Injection Check CIC) dedicated for permanent noise monitoring stations.
-
Manufacturer Calibration Certificate
The calibration certificate lists the individual product data with serial number. The calibration and adjustment procedures follow the documentation and traceability requirements of the EN ISO / IEC 17025 standard.
Speaker Test Software
-
Speaker Test Software (optional)
The FX100 together with the Speaker Test Software forms a comprehensive test solution with a unique and reliable defects analysis. An objective Rub & Buzz analysis correlates 100% to the subjective perception of the human ear. The typical cycle time for a complete speaker test is less than two seconds.
Other
-
Microphone Test Software (optional)
The turnkey microphone test solution provides an extensive test with short test cycle times. The solution is provided by the FX100 and operated via the RT-Microphone PC software. It provides a comprehensive set of measurements for the quality control of microphone components or assembled products, such as mobile phone microphones, headsets or Pro Audio microphones.
